The self priming pump is mainly used to deal with the convey of gas-bearing materials. So it is widely used in the occassions that the liquid level is instable, and the liquid level is lower than that of inlet to draw the material, and also used as reture in the CIP system. And it is the necessary convey equipment in the food, chemical, pharmacy, field.
Online Inquiry|
Specifications
|
10T-30T, 2.2KW-7.5KW
|
|
Material
|
The part contact with medium：AISI316L stainless steel
Other parts：AISI304 stainless steel The sealing contact with medium：EPDM |
|
Standards
|
DIN, SMS
|
|
Impeller
|
Open type impeller, there is no dead end
|
|
Operate condition
|
Health centrifugal pump is a few horizontal transport of high and low level, is not the self-priming type.
|
|
Surface treatment
|
The part contact with mdedium is polished, and other partis glass painted and sand blasted
|
|
Max inlet pressure
|
0.5MPa
|
|
Temperature range
|
-10℃--140℃(EPDM)
|
|
Flushed shaft mechanical sealing
|
water pressure: Max 0.1MPa
water lift: 0.25-0.5L/min
|
|
Model
|
Flow
|
Sucking
|
Power
|
Inlet/Outlet
|
|
CIP-04
|
4T
|
6m
|
2.2KW
|
2"/1.5”
|
|
CIP-08
|
7T
|
6m
|
3KW
|
2”/2”
|
|
CIP-10
|
10T
|
8m
|
4KW
|
2.5”/2”
|
|
CIP-20
|
20T
|
8m
|
5.5KW
|
2.5”/2.5”
|
|
CIP-30
|
30T
|
8m
|
7.5KW
|
3”/2.5”
|