products
Sanitary Single Seat Anti Mixing Valve With Outside Cleaning
Sanitary Single Seat Anti Mixing Valve With Outside Cleaning

Sanitary Single Seat Anti Mixing Valve With Outside Cleaning

Stainless Steel Sanitary TT Type Clamping Intelligent Pneumatic Flow Anti mixing Valve With Control Head

Online Inquiry
Product Despription
Stainless Steel Sanitary TT Type Clamping Intelligent Pneumatic Flow Anti mixing Valve With Control Head
Reversing Valve,Reversing Valve is one of the constructive types of control pipeline valves. This is the most commonly used type of control valve for both continuous (analog) and discrete control of flow and pressure.The most common ones are double-seat valves, their shutter is well balanced.Single-seated valves are most commonly used for small bore diameters due to their unbalanced plug.

Standard Desigh

* Various standards of valves can be provided to clients:DIN, 3A, SMS, ISO/IDF, BS/RJT, ASME/BPE etc.
* The series of valve have two types valve, that is the cut-off type and reversing type,the cut-off type can be made of three to five pipeline connector, their variety fully satisfied the needed of market.

Working Principle

The series of pneumatic cut-off reversing valve is change the energy which creative by compressed air to be mechanical energy, the mechanical energy can drive the valve rod axial moving, thus move the different situation of seal elements, which can control the switch for inlet of pipeline, finally realise the purpose of medium reversing or stop. The manual cut-off reversing valve series control by handle, finally also reach the purpose of medium reversing or stop.
Caution, opening/closing time：Opening/closing time will be effected by the following：
-The air supply (air pressure) -The length and dimensions of the air hoses -Number of valves connected to the same air hose -Use of single solenoid valve for serial connected air actuator functions -Product pressure
Air Connections Compressed air:
R1/8(BSP), internal thread

Pneumatic or manual

Advantages * New type of sanitary disconnecting/reversing valve has more safeness cleanness,durability and aesthetic property. * With open-type bracket to separate pneumatic head from valve body, can check shaft seal directly. This design separates valve driving device from product part to avoid separation

from valve body to pneumatic equipment and product part, and avoid heat transmission from valve body to pneumatic equipment. Normally-open(No) can be converted to normally-closed (NC) shortly. * Ball-shaped valve body has ideal liquidity, cleanness * Be milder to material treatment * Standard design for valve fitting ensure high flexibility and diversity in connection and combination. * Metal stopping ensures longer service lifetime of sealing fast, convenient assembly and repair operation.

Quality requirements for compressed air used in actuators

Quality requirements for compressed air used in actuators pressed air connection furmish air pipe with air connector R1/8 Maximum particle size: 0.01mm Maximum oil content: 0.08ppm 10C or lower below atmospheric temperature Maximum water content: 7.5g/kg

Application
The series of valve are major let the medium reach the purpose of reversing or end stop,because the good sealability and cleanability, they are extensively use to different sanitary industry areas.


PRODUCT SPECIFICATIONS

Product Name
Stainless Steel Sanitary TT Type Clamping Intelligent Pneumatic Flow Anti mixing Valve With Control Head(Internal cleaning)
Standard
DIN, SMS, RJT
Type
Pressure Reducing Control Valves, Water Pressure Reducing
Place of Origin
Zhejiang, China
Brand Name
KinDing
Power
Pneumatic
Media
Water,Steam
Structure
Regulating
Flow Medium Parts
304, 316L(1.4301,1.4307,1.4404)
Port Size
Dn20-150 or 3/4''-6''
Flow Type
L(20),L/L(21),T/L(22),T(30),L/T(31),T/T(32)
Way of Connection
Weld,Male,Clamp,Flange.
Max Pressure
10Bar
Max Temperature
120℃
Working principle
Remote-controlled operation by the driving gear or manual operation by handle.
Medium
Beer, Dairy, Beverage, Pharmacy
Operating Temperature
-20 ~ 120 Celsius Degree
Three drive forms
Normally closed, normally opened and opened & closed
Actuator
Manual , Pneumatic , Electric Actuator
Seal
PTEE, O type seal ring.

External part
Standblasting treatment Ra ≤ 1.6 um
Matt finish ≤ 0.6 um
Internal part
PolishingPa ≤ 0.6 um
Up diaphragm
NBR diaphragm and standard diaphragm.
Down diaphragm
PTEE,EPDM and standard diaphragm.
O type ring
NBR diaphragm and standard diaphragm.
How to order
*Part Name*Size *Material *Quantity *Standard